|
Accessories & Modifications It has Torq-Thurst II's 17 inch rims. The front tires are 275/40/17 and the rears are 315/35/17.
I've added the clear headlite covers and filled in the rear CAMARO lettering in with badges made by RK Sport. My friend Brent at the Sign Shop made me the Snake Skinner windshield banner in 98.
I've installed white face guage cluster by SLP and have a rich/lean gauge in a pillar pod. Painted the brake calipers orange. The rest of the car as far as interior and exterior is the way it came. The interior has the black and white houndstooth cloth inserts with the 30th anniversary white leather.
When it was stock it ran a 8.91@76MPH in the 1/8th mile. On the G-Tech it would do 0-60 in 5.5 seconds, Both of those was on motor. My 2nd bolt-on after the Amsoil air filter was a 150HP shot of NOS. In the 1/8th on gas with just an air filter as the only other mod it ran a 7.67@89MPH. Haven't been back to the track since its had more mods(MSD,converter,RR,etc.). But my best 0-60 on motor is 4.7 seconds now using the G-tech.
Current MODS:as of 12/25/05
Strange 12 Bolt with all the upgrades(eaton posi,33 spline,girdle,etc.)3.42 geared
LT4 Knock module
Denny's Nitrous Driveshaft
Spohn adjustable torque arm
BMR sub frame connecters
BMR panhard arm bar
2400 B&M Stall converter(no longer in car;tyranny cut loose)
Race Underdriven Crank&Alt. Pulley set(removed underdriven alt.)
MSD6AL
30# SVO Injectors
SLP Airfoil
HPP III and 160 Thermostat
Holley Powershot Air Filter
Air Intake Bellow without the silencer
125HP Shot of NOS
R43LTS AC/Delco copper plugs
Redline's Water Wetter coolant additive
Modern Musclecars Volt Blaster
Mobil 1 synthetic oil 10w40 since new
Powerslot brand rotors
Stainless steel brakelines
carbon metallic brake pads
DOT 5 brake fluid
MAC lower control arms
Energy Suspensions Polyurethane trans mount
Upgraded valve springs
1.6 roller rockers
Holley 52mm Throttle Body(not on car yet)
Future Mods
Stroker motor or STS sytem
Reprogramming of the computer
Bigger MAF Sensor
Stall converter
1" to 1 1/2" Lowering of the car
Strut tower brace
SLP headers(got them just not installed yet)
|
skylava